MMP-98N, MMP-98N2 (Multimedia pack 98n) (コンピュータテクニカ)

PC-9801NS, NS / E, NS / T, NC, NA, NA / C, NS / R, NS / A, NX / C, PC-386NOTE AR, AE,
Composite interface BOX mounted on 110-pin expansion bus of PC-486NOTE AS. graphic
Equipped with accelerator, PCM sound source and CD-ROM interface.PC expansion bus
Remove the cover and attach it.
Power consumption 1.75 W. Because the power consumption at the expansion connector will exceed the allowable power consumption of the main unit,
Adapter to connect MMP-98N to other expansion connectors (with through output of expansion connector
SCSI_I / F etc.) Do not connect at the same time.
The CPU mode of the main unit should be "HIGH".Also, EMS page with standard 256 color display function
The EMS function is not used because the memory address of the frame (C000H segment) is used.
Choose.When installing the display driver, the installer
When EMM386.exe is found, its option switch is automatically rewritten, EMS page
The frame address is shifted or set to not use EMS.Resume
Function not supported.
For models with built-in sound function such as PC-486NOTE AS, the sound of the main unit
Set BIOS to "do not use".

The compatible OS is Windows 3.1.We are using Microsoft version Windows 3.1 in the body made by Epson
If the included “Sound Driver for W3.1 & DOS Utility”
One FD in combination with "Display Driver for Windows 3.1 & CD-ROM Utility"
Can not be used withIn this case, from Computer Technica (Device Sales Division)
A compatible disc is available free of charge.

● Graphic accelerator
CRT output: 640 × 400 dots or 800 × 600 dots, 256 colors (non-interlaced).
　It does not support the normal display (horizontal frequency 24 kHz) of PC-9801.Supports 31 kHz horizontal frequency
　Use of CRT.
Simple TV output (video output): 640 × 400 dots, 256 colors (interlaced)
・ I / O address: 40xxH to 5FxxH (xx = D0 to EE, except E8), 46E8H
・ No consumption of interrupt level and DMA channel.
● PCM sound source
・ Stereo, sampling frequency 1, 22, 44.1 kHz, quantization bit number 16 bits (linear)
　Or 8 bits (linear, μ-Law, A-Law)
I / O address: ASIC port = CC0H (not changeable), AD1848 port = 30D0H (to 33D0H) (not changeable)
Interrupt level: INT 0 (can be changed to INT 1)
DMA channel: CH 0 (can be changed to CH 3)
※ Interrupt level, DMA channel are settings displayed at the time of sound driver installation
　Set in the window.
※ PCM sound source driver for DOS is attached "sound driver for W3.1 & DOS utility
　In the \ DOS directory inPCM recording and playback programs can not be operated on FD.
● CD-ROM interface
・ MKE bus.Compatible with Matsushita Hisashi Electronics LK-RC562 NM.
・ I / O address: 30DxH to 34DxH (x = 2, 4, 6, 8, A, C, E)
・ No consumption of interrupt level and DMA channel.