WaveMaster (キュービジョン)

Multi-vendor compatible C bus bus master SCSI I / F and PC-9801-86 compatible sound
Composite board of functions.MidiMaster compatible with Roland's MPU-PC 98
GM sound source can be used by adding.Windows 95 compatible.SCSI part
The performance of the miniport driver for Windows 95 is not much different from the driver for 55 boards.
Equipped with MSX joystick board.4 dips on the board
There is one switch.

Product Specifications
・ SCSI section
　SCSI LSI: WD33C93B (Western Digital), BMX-2 (Workbit)
　Transfer method: bus master transfer (10 MB / s)
　I / O port: CC0h, CC2h, CC4h, CC6h
　Interrupt: Select from INT 0, 1, 2, 3
・ FM sound source unit
　FM LSI: YM2608 compatible
　Tone: FM6 sound (stereo), SSG 3 sound (stereo)
　I / O port: 188h, 18Ah, 18Ch, 18Eh (288h, 28Ah, 28Ch, 28Eh)
　Interrupt: Select from INT 5 or INT 6
・ PCM sound source part
　PCM LSI: CS4231 (Crystal Semiconductor), SYNPHONY (Workbit)
　Sampling frequency: 4.13 KHz to 44.1 KHz
　I / O port: same as PC-9801-86
　Interruption: shared with the FM sound source unit

Supported models (Note):
PC-9801ES / RA / RS / T / DA / DS / FA / FS / FX / US / BX2 / BA2 / BX3 / BA3,
PC-9821 Bs / Bs / Bp / Bf / As2 / Ap2 / An / As3 / Ap3 / Xe / Xs / Xp / Xa / Xn / Cn / Cb / Cx / Cf,
PC-486PSR / SE / FS / FR / FE / HA / HX / HG / GR / GR + / GF / MV / RS / MU / MR / MS,
PC-586RA / RV / MV
Note: There are several non-existent model names such as Ae2 in the manual.
On PC-9821 Xe10 / Xa7 / 9/10, the PCM sound source of the main unit and the 86 sound of this board
It can not be used together with the function part (they compete with each other in INT 5).Also use SCSI function
In this case, do not use the second communication port on the main unit
Set to or change the INT 1 assigned to it.

Soft switch settings:
Perform settings such as interrupt level and DMA channel.
By turning on or reset while holding down [CTRL] + [GRPH] + [S] simultaneously
Call the setting screen.

HDD parameter analysis method by AI multi-vendor:
Press [CTRL] + [GRPH] + [P] simultaneously while checking SCSI ID at startup.
When the [analyze on] display appears, release the key from the key.

・ 4 series dip switches SW1: availability of sound function, availability of SCSI function,
　Setting of main unit model
1: Setting the sound function availability
　ON Sound function enabled (default setting)
　OFF sound function disabled
2: SCSI function availability setting
　ON ■ SCSI function enabled (default setting)
　OFF ■ SCSI function disabled
　※ It is necessary to turn on when setting the soft switch.
3-4: Setting of machine model (Note)
　OFF-OFF PC-98XA
　OFF-ON ■ 8086 / V30 loading machine
　ON-OFF ■ normal / high res combined use machine
　ON-ON Model other than above (default setting)
　Note: The manual like this for models other than the above "compatible models"
　　　The settings are described.