WIN-note 98 (キュービジョン) PC-9801NS, NS / E, NS / T, NC, NA, NA / C, NS / R, NS / A, NX / C, NS / L, PC-9821Ne, PC-386NOTE AR, AE, PC-486NOTE AS, composite interface mounted on 110-pin expansion bus of AU Face BOX (PC-9821 Ns, Np can also use expansion bus conversion connector (PC-9821N-U07)). Equipped with graphic accelerator, PCM sound source, FM sound source, SCSI I / F.PC expansion bus Mounting is possible without removing the cover of. Screens other than Windows are not displayed on the external CRT connected to the CRT connector of WINnote 98. Fast battery and CRT adapter for exclusive use to display, or dedicated monitor A cable is necessary. (For models prior to NS / A, a CRT pack is attached when the WINnote 98 is attached. A special CRT pack is included). The resume function is not supported.In addition, FM sound source is installed in the body such as PC-486NOTE Do not use the FM sound generator of the main unit with the model. Supported OS: MS-DOS 3.3 or higher, MS-Windows 3.1 (Microsoft version, NEC version, Epson version). It seems that it can not be used on Windows 95.In addition, the main unit with more than 14.6MB of memory It seems that accelerators can not be used. ※ There is a possibility that a problem may occur when installing WINnote 98 because of insufficient power supply capacity in NS / A. 　When Qvision still exists, it is free within 3 months after purchasing WINnote 98 　The main body was being remodeled at. ● Graphic accelerator It is equipped with CL-GD5428 (image memory 1MB) manufactured by Cirrus Logic.I / O address = 4xES, 5xES, 46E8 (x = 0 to F, S = 0, 2, 4, 6, A, C, E). 640 x 400, 640 x 480, in combination with an external multi-scan display Display at 800 x 600, 1024 x 768, 1280 x 1024 dots resolution possible. Even when using play, it is possible to display 16.77 million colors with 640 × 400 dots (all are Windows 3.1 while using it). Display mode: Below, Color number ■ Horizontal frequency (kHz) ■ Vertical frequency (kHz) ■ Scanning method in order. (I = interlaced, NI = non-interlaced, NIFF = non-interlaced 　Flicker free) ・ 640 × 400 dots 　　256 24.8 56.4 NI 　　65536 24.8 56.4 NI 　　16.77 million ■ 24.8 ■ 56.4 ■ NI ・ 640 x 480 dots 　　256 31.5 60.0 NI 　　256 37.9 72.0 NIFF 　　65536 31.5 60.0 NI 　　65536 37.9 72.0 NIFF 　　16.77 million ■ 31.5 ■ 60.0 ■ NI 800 x 600 dots 　　256 35.2 56.0 NI 　　256 37.9 60.0 NI 　　256 48.1 72.0 NIFF 　　65536 35.2 56.0 NI 　　65536 37.9 60.0 NI ・ 1024 x 768 dots 　　256 48.3 60.0 NI 　　256 56.0 70.0 NIFF 　　256 58.0 72.0 NIFF 　　256 35.5 87.0 I ・ 1280 × 1024 dots 　　16 48.0 87.0 I Wide screen function allows you to use Windows screen widely even on small displays Possible (for example, using a 1280 x 1024 dot screen with a 640 x 400 dot normal display). Whether to use this function is specified when installing the driver. ● FM sound source Equipped with YMF264 (completely compatible with PC-9801-26K).3 FM sound sources (monaural), 3 SSG sound sources (monaural). Equipped with joystick port. ● PCM sound source Equipped with CS4231.Sampling frequency 5.5-48.0 kHz.Interrupt (INT) level (0 to 3), DMA channel (0, 3) is specified when installing the driver. ● SCSI I / F 55 compatible, equipped with multi-vendor function.There are two transfer methods: DMA transfer and I / O string transfer. DMA channel = CH 0, interrupt level = INT For hardware settings, hold down [CTRL] + [GRPH] + [S] simultaneously and turn on the power switch Use the "Switch setting menu" screen that is displayed by pressing the / reset button. 1 Transfer method ・ I / O transfer ... Corresponds to 80286 CPU or more.This mode is usually faster than DMA transfer 　Used in. DMA transfer: Some devices and software operate only in this mode. 23.5 inches MO mode ・ MO mode: Normal MO drive mode. -HD mode: A mode that recognizes the MO drive as a hard disk.This mode 　Will lock the inserted media. ・ Automatic discrimination ... Check the contents of the format of the MO media inserted when the main unit was started 　This mode automatically determines whether it is MO mode or HD mode.Normally used in this mode 　About. 3 check ID 　Search for SCSI_ID only up to the specified ID number.Reduced system startup time 　Valid for 4 quick format 　When it is ON, formatting of the hard disk of specified ID can be done at high speed. 5 connection check time 　Set connection check time of SCSI device.Because the boot time differs depending on the SCSI device, 　Specify the time to be recognized normally.Usually specify "normal". 6 base I / O address 　I / O address used by WINnote 98. 4xE0, 4xE2, 4xE4, 4xE6, 4xEA, 4xEC, 4xEE 　Choose from.The factory setting is 4xE0. Start of automatic parameter analysis program: When the display shows "WINnote98 BIOS REV 1.00 ...." after turning on the power of the main unit, [CTRL] + [GRPH] + [P] At the same time, "HD parameter automatic analysis program" is started.I want to analyze Specify SCSI_ID of hard disk.When analysis is completed normally, press the [ESC] key, and Is that okay? "Select "Yes" in response to the message on Register format information.When the hard disk to be connected is changed or connected You need to do this also if you change the hard disk SCSI_ID.However, they are connected You do not need to do this if you remove the hard disk and use it. If automatic analysis of parameters fails, use "HDPARA.EXE" in the attached disk. To analyze: Start the hard disk to be analyzed in the original environment, and from the attached disk HDPARA.EXE Start up, and display the “HD parameter display program” parameter (number of cylinders, Write the number of headers and the number of sectors).Then connect the hard disk to WINnote 98, Start the "HD parameter automatic analysis program", select SCSI_ID and press the [HELP] key. Enter the correction mode, enter the previously written parameters, and then press the [f • 1] key. Register the meter.